NEWS & INSIGHTS
Latest innovations, events and important developments

Can One Automatic Lubrication System Handle Different Greases on the Same Machine?
One machine can use several greases, but one lubrication system normally shouldn’t. How reliability and OEM engineers decide which lubrication points can share a grease.

Food-Grade vs OEM-Recommended Lubricants: Which Should a Food Manufacturer Follow?
The OEM specifies one lubricant and food safety points towards another. Why food-grade status and equipment performance are separate questions, and how engineering managers can satisfy both.

How Can You Verify Grease Is Reaching Critical Components on Mining Equipment?
The pump ran and the cycle completed, but neither proves grease reached the haul-truck motor bearing. How reliability teams verify that the right grease reaches critical mining components, in the right quantity, at the right time.

How Do You Know an Automatic Lubrication System Is Actually Working?
The controller cycles, the pump runs and the reservoir empties. None of that proves grease reached the bearing. How to monitor and verify automatic lubrication on mining equipment.

Same Viscosity, Different Brand: Are Lubricants Really Interchangeable?
Two lubricants can share an ISO viscosity grade and still be built on different base oils, additives and approvals. What to check before treating them as interchangeable.

Why Do Automatic Lubrication Systems Fail on Heavy Mining Equipment?
Auto lubes that “never work” are usually a system problem, not a technology problem. Why automatic lubrication systems fail on heavy mining equipment, and how to design, monitor and prove them.

Industrial Lubrication Best Practice: Why Standard Maintenance Plans Keep Causing Repeat Failures
Recurring failures are rarely isolated events. More often, they signal a maintenance strategy that no longer fits the operating environment.

How small lubrication decisions quietly drive big maintenance costs
Supply disruption is exposing how much operations rely on fresh oil always being available. How small, routine lubrication decisions add up, and how to extend lubricant life safely without increasing risk.